This Ironton OHV Horizontal Engine is an easy-to-install solution for small engine needs. With 420cc and 18 ft./lbs. Gross Torque, this 500-hour engine provides enough power to run a wide range of equipment, including log splitters and pressure washers. Its design incorporates a cast iron cylinder sleeve and dual ball bearing crankshafts. Low-oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get ruing on the first pull.n
| Item# |
45752 |
| Brand |
Ironton |
| Manufacturer’s Warranty |
3 months parts / 3 months labor |
| Ship Weight |
75.0 lbs |
| Engine Displacement |
420 cc |
| Engine Type |
OHV |
| Start Type |
Recoil |
| Shaft Diameter |
1 in |
| Shaft Length |
2.84 in |
| Shaft Diameter Metric |
25.4 mm |
| Shaft Length Metric |
72.2 mm |
| Shaft Output |
Horizontal |
| Shaft Keyway |
0.25 in |
| Shaft End Tapped (Diameter (in.)/Threads per inch) |
3/8-24 UNF2B |
| Shaft Rotation (From PTO Shaft Side) |
Counterclockwise |
| PTO Height |
5.2 in |
| Cylinders (qty.) |
1 |
| Cylinder Bore |
Cast iron |
| Cooling System |
Air cooled |
| Bore |
3.54 in |
| Stroke |
2.6 in |
| Air Cleaner Type |
Pleated paper w/foam pre-cleaner |
| Fuel Tank Capacity |
6.34 qt |
| Oil Capacity |
1.1 qt |
| Low Oil Alert |
Yes |
| Lubrication System |
Splash |
| Ignition System |
Electronic |
| Governor System |
Mechanical |
| Carburetor |
Float/choke |
| Max. RPM |
3,800 |
| Muffler Included |
Yes |
| CARB Approval |
No |
| Bolt Circle |
5, 6.5 in |
| Mounting Base Length |
3.7 in |
| Mounting Base Width |
7.7 in |
| Dimensions L x W x H (in.) |
19.7 x 17.7 x 19.7 in |
Reviews
There are no reviews yet.