10EKD – 10kW Generator, Gas Fueled, 60Hz, 120V, 1-Phase, Heat Exchanged

Features of the KOHLER 10EKD – 10kW Marine Generator

Integral heat exchanger

CARB/EPA emission compliant (Low CO)

One-side serviceability of fuel filter, cooling systems, and lubrication system

Sequential-port throttle-body fuel injected Attached overflow bottle

Remote start 12-pin connector.

Voltage regulation of ±1.5%.

Rotor and stator are vacuum impregnated and coated with high-bond epoxy varnish. Varnish helps prevent corrosion in high-humidity areas.

Copper windings ensure minimal heat buildup. Insulation meets NEMA standards for class H insulation.

Directly connected to the engine, the generator has sealed precision ball bearings with a precision-machined steel sleeve in the end bracket (or end bearing tolerance ring) to prevent shaft misalignment and extend bearing life.

Specifications

Hertz:	60 Hz
Generator with sound shield
Width:	500 mm (19.69 in.)
Height:	467 mm (18.39 in.)
Length:	773 mm (30.43 in.)
Weight, wet:	132 kg (290 lbs)
Generator without sound shield
Width:	466 mm (18.35 in.)
Height:	445 mm (17.51 in.)
Length:	691 mm (27.2 in.)
Weight, dry:	118 kg (260 lbs)
Weight, wet:	120 kg (265 lbs)